I overcut my parts by .092 (2.3368mm) I have never used my pinstops for setup. In fact the only thing I have ever used my pinstops for was to compensate for having complete idoits running our cnc. When they get so complacent with the laser that they dont check the pod setup before loading parts and ...

I buy 1/8"x 1/2" cold rolled precut into 38" pieces for $0.25 per foot. Then we also buy a couple pieces full length and cut for special applications. Check your local steel yards they are hurting for business just like everyone else. We thought about going to fiberglass but changed our minds, we ha...

Glad to here you got your cnc now, let me know if you still want those files we talked about a couple months ago

We make all our stone racks, For remnant and full slab we use the same design for both. The full slab racks are more heavy duty but still the same simple design. Cost about $600 for 20 ft takes us about 2 hours to cut and weld up. You can cut the uprights at whatever lengths suit your scrap. We have...

Chris, I will send you a copy of my library whenever you are ready for it, I have 1510 sinks as of this morning and is constantly growing a little more every week, but like mentioned above always check you files!!! Just pm me when you get ready for your machine, I am always happy to help someone out...

In the past we used the one's from chemical concepts, but switched to the EZ Brackets. At less than $5.00 apiece, we put them in if the dishwasher is there or not, and if the customes switches brands or models they are so universal you would never have a problem with something else lining up.

We did one earlier this spring, for a shop employee's handicap mother. That sink cutout all around sucks!! There is no cheat to use that is reliable, you could apply some mesh backer to the " point" side before you cut it, or try putting in a small piece of whatever you use to rod your sink cutouts ...

Here is there website, they sell direct.

Http://www.monumenttoolworks.com/pages/gorillagrip.htm

with a pictue like that I don't care if there are aliens playing volleyball in the background I probably would not have noticed!!

Tynan,
Are you giving out any samples or Demo's?? I spent $1200 in fingerbits last month and am always looking for the next BEST thing!!!

When we get a notification to a thread we subscribed to, instead of taking you directly to the thread, the link takes you to the forum?? For instance if someone post a sink needed in the dxf, the link just takes you to the dxf forum, unlike the old site that took you to the thread they posted. Can w...

Dan R. wrote:We use the 90 degree tape, it works perfectly.

Where do you order that 90 Deg. tape from I am out and can't find it anymore

Guy, I am not seeing a "members area" , We had this problem once before on stone advise. I am the Manager of Kitchen Craft Inc., Kaiser Mo. I cannot remember if we found it under Kitchen Craft Inc. or Scott Sapp ( the owners name)?? Also how do we re set up our profile?? or can we copy and paste fro...