Hey Guys,
You need to check out our new LT 2D3D!
Works fast like the LT55XLW and 3D when you need it. laserproductsus.com

You can also use "bounding box's" to figure in drop on your pcs. This will help with quoting out of our software.

Heads Up... 2.0 is being released next wk. Look at the changes before you down load. I will have more info on those changes for you in our forum later today.

Chris, next that happens email me the file & a brief note.
Thanks

Guy's , if you are wanting to buy just the Disto head with out our program we will take care of ya. You don't have to go online and buy from somebody else. YOU will get our SERVICE & SUPPORT. Contact me for pricing. My cell # is 970-901-9459 send me a text or PM from here. I will get back to you.

Hey Guys, I would like to know how many of you have bought Lt's this last year. You will get a extra target package( T tagets & Pins/blocks) just for letting me know and also, if you would let me know when you are buying another or if your buying your 1st you will get a discount. Just PM me and I wi...

Hey Guys,
Serial # AF-099116XL Has been stolen from a shop in the Atlanta area . Please keep an eye out for it.I would love to catch one of these guys. THANKS EVERYBODY !!!

Glad to hear your busy, Chris !!! Send me your new Address when you can. I was looking forward to ya talking up our 3D to the BigGuy

You could run it from team viewer and be setting in your office and just have someone set it up for you... If you had to... Shoot, we're here to take care of ya man!

Chris,
Was just ignoring ya a little bit . Sounds like from your last message you are liking the 2D3D program... Nothing easier to run, like I said. Anything else I can do for ya!!! just call me 5 or 6 times

As some of you already know, we have married our program to the Leica 3D Disto Laser. Measure tops and walls from 1 location. Window opens 30ft off the ground or a fireplace 20ft tall.We have made it so you can run wireless. And, other updates to our program will soon be available at NO CHARGE. Just...

Hey Guys, We are looking for anyone willing to share these two items. Any help is greatly appreciated. We are looking to put together a couple of different generic contracts & check off lists to help out some of the up and coming shops. Please attach them to a email to me. I would like to "Thank You...

OK, I told myself when I became the moderator for Our room that I would stay out of these conversations. But, I have to throw this out there. Check on cost of maintenance, training. Support - All in house and at your shop when needed. Heck, You can take the LT for a test drive! And we are so confide...

Dustin, Just get on to the net with your computer that your using with the LT. Open up your Lt program. It will ask you to update and choose yes. That should should it. Be sure to check your tripod, the instructions are in an early post. Call me if you have any problems. Are you running a PDA unit? ...

Hey guys,
I have had a couple of company's out of Florida looking for LT operators. Get in touch with me if you would be interested.

Hey, I can't read your mind! I think there is a thing called a Phone for communicating. To HIGH tech for ya!!!
Chris call me.

Guys, you need to quite loosening and tightening the thumb screw(NOT THE ONE ON THE LEG SUPPORTS) on the vertical shaft when cranking the Laser UP or DOWN. This will allow the head to move, which is bad. You need to just tighten it enough to keep the head from moving and keep it from bouncing when c...

Great Job!!! Really shows off the technology.

Yes, your Asus or Samsung is covered by the warranty. Now if you drop it in a bucket of water you'll probably have to pay cost to fix it.


Scott / Laser Products

Don't race the beep to move the Laser to the next point. Let the Laser do it's job. If you move it before it completes the measurement you will get a bad reading. You can shoot a straight wall and make it look crooked if you race the beep. Keep your HAND off the Laser after you point it. Touch the s...

2.0 is coming down the pipe soon. Can't give any details yet. Also, soon if you are using Moraware; when you fill in job info you will be able to populate the job info in the LT with a push of a button. No more double data entry.



Scott /Laser Products

Hey guys. I would like your opinion on the HP Slate. We are looking at offering it as a option to the ASUS.


Thanks

What a waste of perfectly good oxygen!

I have to agree with Dan! It will be interesting to see what comes out in the wash. Innocent to proven guilty or is it guilty to proven innocent .

The serial # AF-048067

Hey Guys,
The serial # is AF-048067.