Hello,
I need 3 pieces of either of these colors for a surround.
Anyone want to cut and ship to Maine?
I could even take 3cm....sawn only

1 @ 44 x 7 3/8
2 @ 24 3/8 x 7 3/8

PM pricing to slittle333@gmail.com if you have it.

Thanks!

Breaking through the polish is the hardest, most fatiguing step. You want to keep the steps to a minimum, so starting at the highest grit, while having good cutting efficiency is the key. Luckily, Black Absolute is soft. I would recommend something like a 120 grit copper bond, or copper hybrid pad ...

Hello again, Juparana type stone been in since 2004-ish. The stone is uniformly darker in most areas that can be seen/used. Areas where it is it's more natural color are in back corners, under appliances and 'stuff' on the counters. Also there is a strip of 'clean' stone where the epoxy was applied ...

Well for some reason I haven't been getting my email notifications for all your responses, thanks! I sealed the stone last week as they decided to hold on the joint work until after Labor Day when less guest traffic and not too cold to open the doors and vent the lobby while I do the work. So.... I ...

Hi all, I have a unique situation I just want to double check on..... 2cm Stanstead or similar light gray granite has been installed by a mason over interior heat/air conditioning radiators, and double as window sills at table level in a hotel lobby. Pieces are about a foot deep and 3-4' long each. ...

Thanks everyone. I appreciate your input, all was right in line with my own thoughts, with some new info. Taking the stone out of the house tomorrow. Won't be honing for a little while, need to reconfigure cabinets etc. I'll post some pics when I'm done and let you know what I did for a process. Hop...

Looking for pad suggestions to accomplish this task... Removing an existing polished AB kitchen, honing outside, on site, with some water but not ideal shop scenario. Re-installing with some modifications after new cabinet configuration is made. 80sf including splash. Best pad brand for these condit...

I took a quick look through some older posts....PM'd a couple to see if still available.
In need of a boom, please send pics, info, and pricing if you have one, thanks!
Stephen Little
MHD Stone and Tile
slittle@maine.rr.com
Portland, Maine

Thanks for the insights. My first thought was that it was in the stone too....but why not visible for a month? Silicone is a possibility, dirty rag, noticed afterward, surfaced cleaned and left....then it shows up later? Possible. If it wasn't Ager then it would be StoneTech color enhancer, (I know ...

Hi all, thanks in advance for any insights you may have. Here's the history from the homeowner. 7 year old absolute black with leathered finish. Installed and not sealed. Spots started appearing on one section only about a month after installation. Fabricator's solution when called to address was in...