BTS is looking for well qualified subcontract installers for commercial & residential projects in the upper Midwest.

Please contact:

Mike Brockmeyer
mike@btsgranite.com
701-772-7730

email sent, Thanks!

still for sale, best reasonable offer gets it.

Still for sale, would like to sell by end of june so price is negotiable...

For sale: Park Sierra Bridge saw

15hp motor
tilting/rotating table
steel legs

Located in- Grand Forks, ND 58201

Price is $18,000.00

This has been a good saw for us we are just upgrading to a Yukon soon, I can email pics.

I can try and help if you still need? we run a fabcenter but it should be similar if not using jet.

scott m wrote:That park machine looks great.......Just keep in mind fabcentering is more about software then hardware. You can make any cnc with a saw into a fabcenter, if you want to spend 4 hours programming a slab.

just to be clear I'm not a park "groupie" but 4 hrs to program a slab is way out touch.

We purchased a park fabcenter about 2.5yrs ago, not many issues except laser which park has been good about taking care of (even after warranty expired), state side service and previous buying experience's is why we continue doing business with them.

Dave, what is your price on these machines? we are looking to add another cnc when we get into our new building soon.

Just wanted to say thanks to Mark from terminator for dropping off a set of the new Knockout pads for our fastback we are running them @ 25" a min and getting a great polish from them!

The gs350 from terminator cuts through tropic brown like butter on our sierra a truly night and day difference from their other blades it is one of their cheaper blades too go figure. never tried it on quartzites though.

Matt, have you tried the pods eric is talking about? I'm just trying for a be all end all to this.

Thanks everybody for the reply's i think the new bit is better but I am pretty gunshy on drilling faster as this problem has cost me a thousand or two already i think i will go with the sacrificial pod idea and drill all the way thru, damn this beast is hard to tame...

mike

sorry, it was 2" @ 2000 rpm staying an 1/8th from surface and knocking them out on site, should it be faster than 2" a min? i used to core holes manually alot faster but didn't think that was relevant.

We are encountering a few blowouts on our titan fabcenter the bit we are using seems to glaze almost right away after dressing this has only happened on harder stones and india granites we are using an orange bit from granquartz that came with the machine, and have now switched to a terminator blue ...

Thanks guys, My pleasure dave your people there are easy to work with.

Just wanted to post a thank you to park industries for there great service on our recent titan fabcenter purchase they were first class all the way from sales, training and support the machine performs as dreamed and I couldn't be happier as to how it operates, we are operating at full capacity of t...

is this your shop?

is the manzelli new? if not can you send pics to...

mike@btsgranite.com

thanks

Use like ice cream bucket plastic and just heat up with a heat gun and bend it up alittle bit not fully covering the vent let me know and i can get pics if you need.

Andy, we are using the skil from bb also and were burning through them until i put some plastic under the vent right by the brushes and cupped it up to keep water out held on with electric tape also pop the caps off the brushes every once in awhile and wd40 them the one im running like i described h...

wow that is crazy but needed i guess, makes a guy wonder how often you are in the crosshairs?

please pm me price for kaesar and hrs.

cut 3 40-60 sqft kitchens today on a sierra.