I'm searching for a 208 to 400 volt 30 kva transformer.

Can you send pics of the Midwest saw?

Looking for a transformer in good condition 208 to 480.

Thanks!

I’m interested in the beaver if it doesn’t work out with Alex.

Frank, I see this post is a few years old and I was wondering what you decided to go with as I find myself where you were 2 years ago and trying to figure out if Stone Profit Systems is a good solution. Thank you, Brea [ Hi Brea- I still have my reminder to call you. I’ve been swamped at work and t...

Did I miss the BVC (Alex's) response to the .04 tolerance?? I run all Blick Pods, because BVC doesn’t make our pod height. I would be interested in testing and trying them out. I love the idea of a plastic pod that is easily repairable. My biggest issue with Blick is the cost to ship back to them to...

I’ve never heard of phases switching because a power surge.. this seems very odd to me. I’m not familiar with your machine, but typically the servo motors for axis motion is controlled by a inverter drive which isn’t affected by any phase (no matter how it’s phased it will work correctly). You can t...

I should reword my statement above, it’s more than just the cost to repair with Blick that gets me wanting to try the green pods. IIt’s the process of shipping them back, waiting for repair and then shipping them back to us. That just doesn’t work for us. We just bought $3,500 in new Blick pods just...

In my opinion, you should not mix cups and manufacturers. The green cups may be fine, but mixing the 2 is asking for problems. [ What kind of problems? It can’t be worse than using damaged blick pods and hoping it has enough suction to keep tops from moving. The cost from Blick is too high to repai...

It’s not available, sold some time ago.

Some of the above info is really dependent on which spindle he has. VEM has 2 sensors, Breton has 1 sensor. First thing I would test is after performing m21 in MDI, does the gripper rotate? It shouldn't. The demensions I believe are different between the 2 types of spindles. If Breton, use a # 5 All...

How old is the machine, what model is it. Do you know if it's a VEM spindle or Breton Spindle?

Ger, do you consider a Master 43 a quality machine? [ Does it really matter what a salesman from a competing manufacture thinks of competitors equipment? It's tough believing what they say about their own equipment half the time! Have you had a chance to visit a shop running the machines you're con...

I have 2 Breton NC300 K26's and have been extremely happy with them, the guys at Breton have always been there when I've needed them.

Thanks Joe, I just sent a PM.

Hi Joe-

We just got through our electrical upgrade and can now start looking at recycling systems again. Is this still available? Do you know how many CFM's are required to run this system?

Thanks Joe.

Jon

Alex_Bores wrote: ↑

Sat Feb 04, 2017 1:59 pm

jrupert3 wrote: ↑

Sat Feb 04, 2017 8:30 am

What's the pricing on the v cart?
[

$480 for the price of the flip cart.

I have fliers for all sorts of things. I will add pricing for future posts Dave.
[

$480.00 is the correct price?

MSRP is less than that. https://www.wehausa.com/V-Cart-Flip-Car ... 137206.htm

What's the pricing on the v cart?

Angel wrote:if your going digital you won't need templates. It would just be an extra fee and an extra PIA. The vinyl material, plotter, etc is not cheap.

Just make sure you check measurements before leaving job site
Check measurements on pcs before they leave the shop

X2

steven nenzel wrote:My Canadian farther-in-law says I'm an Angry Man. I would have to agree.

Might be the greatest compliment a man can receive.

Can you post pictures?

We buy trans black Axiom from Integra.

If your templators are also taking time to cut the vinyl, you'll be amazed how much time this takes. When we started cutting with our CNC saw and no more vinyl our templators were able to template one or two more jobs a day. I purchased the CNC saw first, than a router. Both had an awesome impact to...

Thank you Mark, these reports are very helpful.

Chad Worrell wrote: Nothing (besides a waterjet) is as fast as a good fabricator in my experience. My guys can do a sinkhole in about 40 min.

x2

Either pay for more experienced fabricators or buy a machine to do it (water jet, CNC Router or CNC Saw can all accomplish this better than any machine).