The Hellion is very nice. We were cutting over 100"/min with it. At that speed the chipping was getting a little extreme and you had to babysit, but we got through it quickly

About to take this out of the shop and put it outside unless someone wants it, I just need the space. Selling as is but it is in good working order. I can email a video of it operating. Willing to sell for $15k obo

Yes sir;) as of now we still have power and water to it too.

Cody shoot me an email at darren@capaulstoneworks.com and I’ll send you a video. I have two other line machines that are newer and I’m out of space. I think the bevelers would work just fine with the proper tooling and some attention and grease. We just never used them, we always rolled everything b...

Yes I still have it. Make an offer I’d love to see it get back into production somewhere.

How about $25k? I would seriously love to have the space in the shop. We run all of our convex shaped edges on our new router and also have a flying flat, so we just don't use it very much. Shapes full bull or half bull (laminated or 3cm) in one pass to an awesome polish. I have recent videos I can ...

REDUCED for quick sale

Marmo LCV 711M for sale $9,000

Everything works great, with the exception of the bevelers (which we never used).

I'd love to find a good home for this thing! Make an offer:)

Call if you have any questions. Thanks!

Darren Capaul
(509) 863-8954

2006 Velocity For Sale $30,000 Approximately 3200 hours. Machine is located in Spokane, Washington. Works great, has a lot of visible rust but all functions operate. Could use some new rollers soon, also belt has a couple snags in it but it still works just fine. I'd like to sell it instead of putti...

The answer is "Super Bad". Like in a James Brown sort of way...

Brad,

We have a k600 and I'd be happy to walk you through it if you haven't figured it out already....
Call anytime!

Pro Edge 2 for sale. Machine has just under 11,000 hrs. I'm selling because I have moved to a new location and upgraded equipment, no longer need this machine. Has not been connected to power for almost two years, but was working perfectly when we took it out of service. Creates a very high quality ...

Machine is sold. Thanks for all the interest, it was nice to talk with a few of you guys...

I'm paying rent in the space until I move the machine so it would really need to go very soon. Someone is looking at it today with the intention of buying but I will update this post ASAP if it sells. Thanks

I have a Park Cougar for sale for $11,000. The saw works perfectly. Has rotating and hydraulic tilting table. Head manually pivots to 45 degrees. We took very good care of this saw, had it for 5 years but now have a CNC saw. The only thing wrong is a small broken collar on the hydraulic pump handle ...

Thought I would chime in to echo this post. I recently bought a K600 from Sasso. Not only am I impressed with the capabilities of the saw, but the service has been absolutely amazing. The training and install could not have gone smoother, Mark actually was able to help me through a large backlog of ...

Low hours of 1665 as of a month ago

I have a pro edge three that will be for sale at the end of this month (August), maybe sooner. We use it everyday, but I will be hooking up a Velocity at the end of the month and don't need the pro edge anymore. Asking $20k. Its in really good working order, no major flaws. I can check on the hours ...

I can tell you that joining is a very small cost for the wealth of knowledge and info you receive. I think the first week I joined I saved enough to cover my membership fee. It's well worth it

Bump. Still available, doing some spring cleaning... Would love to see this thing move

I'd like to receive it please. My email is darren@capaulstoneworks.com

Thanks!!

I'd love to give them a try. Will post results after using them.

Stacy,

I'm interested and close by! I'll give Joe a call this morning.

Thanks

I typically add a flat fee between $300-$600, depending on the size of the piece, and what the entrance is like. No formula, just something I address on a case by case basis (estimate extra personnel costs, plus 50%). The install crew has several carts to choose from, and my two man install crew can...

Email sent. Thanks Steffen

See the new price, $7,000