Wanted to share a private residence we just finished up in Vancouver. Another classic Vancouver Calacatta marble wrap of the entire bathroom All the walls and the floor too days to 3d render until the client was fully satisfied with the vein match Bordignon Marble and Granite.jpg Bordignon Marble an...

From up in Canada, make a showroom that represents the work you do. From the first step your client takes in your showroom let them know you take pride in your work and that reflects in your showroom. Or be a hack job and have a hack showroom. Just because we are in the stone industry that is dirty ...

Gorbel free standing work station bridge crane fully motorized This system can be setup in various configurations or multiple crane systems Fully motorized in all directions equipped with a double bridge * 2ton Harington chain hoist * Control pendant 228' (Long) x 28' 7" (wide) x 20' 2" (tall) Buyer...

At 40 seconds it starts
https://www.youtube.com/watch?v=wednUwktKww

Just saw a video of a Denver Unika 5 hitting the edge by turning the spindle to 90*.....no more lines?.....
Just wondering if anyone out there with a 5 Axis CNC does this, and eliminates the lines?
Is this the solution to the famous CNC edge polishing lines?

Its no problem at all. I did probably 1000 slabs this way on the breton fabcenter. Its certainly more efficient to do it this way and you will save way more material by tight nesting. I used blocks of wood to catch the fall off and you don't need much. It should be 1/8 less then your pods. The tabl...

I do it on my Denver HT. I ordered my saw with an aluminum table and a vacuum pods. However, I have found that putting rubber horse stall mats on the table is much easier and faster. With the slab laying on the rubber table I can but the slab and drop the sink. Much faster then location back stops,...

take a look at a CMS "VNT" fabcenter....they cut on the pods and then profile and polish without even having to move the pieces - so you can lay a full slab on the pods and take finished pieces off, definitely worth a look. \ Hey Luke, Thanks for the info, I was actually on their website and didn't...

Hi Michael. I have a Northwood UFC with shuttle table and was here during the infancy stage of this word "Fabcentering". I have on occasion done what you are talking about. When I first bought it, I thought I'd do it a lot. in reality(atleast in my opinion)its not real practical and takes too much ...

Hey Guys, Anyone out there with a CNC Fabcenter cutting on the pods alone? I know Park and a few other guys say not too because of the "Slurry" and you would "scratch the slab" but in my opinion there is probably more slurry when using a finger bit opposed to a 1/8 saw blade. We are looking into pur...

Reading through this topic I see a few people saying "it cant be done" anything can be done the factory polished it, it didn't come out of no where but after visiting the factory in Vietnam and speaking with many companies with my trips over to Italy, including the actual Breton factory, I have come...