Stone-tech also makes a oil stain remover
any poultice stain remover should get it out of the stone
In the pass i have used a heat gun and some lacquer thinner to remove oil stains!

We have an overstock of 2" x 2" zero tolerance wheels, 5/8x11 thread with no resin in between segments.
Brand name - $90 each.
Won't last long. Will ship free of shipping charges within the USA.
Thanks for looking.

We have these sick 7" Vortex pads that are hogs hair pads with diamond sprayed on the bottom. They come in a 200g, 400g, 800g, 1500g and 3000g and a lux to finish off. we have honed tops with the 200-400g and that is just using some water and a 7" Makita sander/Polisher on site. No acid involved at ...

Do you ever need to touch up your marble or travertine or quartzite to get the job done? It's one thing to do it in your shop, and another to do it onsite in your customers home. Most of the fabricators we come in contact with are hesitant to use any acids because of the danger of damaging a cabinet...

Overstock sale!
we have 14 Stone Pro telephone style suction cups that were mis ordered.
Our mistake is your gain.
$35 plus shipping
Thanks again,

We have a ton of colors in stock. Sale this week on all Integra Adhesives 100ML and 250ML in stock. We also have 500ML rodding compound. Big discounts on Integra we have that is approaching, or slightly over expiration date. Email me at ryans@gmrtools.com with color requests and I'll get back to you...

We Have a turn around time of roughly 2 weeks. The EDM is done to original specs.
call me or email me and we can talk!!

We Have a turn around time of roughly 2 weeks. The re-truing is done to original specs.
call me and we can talk!!

There are many reasons for this type of finish on slabs. Did you choose the slab at the distributor facility or the fabricator facility? The slab did not material change between the time you selected and the time that job was installed. We just dealt with this type of situation. A client purchased ...

3 Step pads can save time but that doesn't mean they are better then a 7 step. 400-800 grit is the true polishing pads of the 7 step. 50-100-200 stage for polish and 1500-3000 buffs the polish step #1 starts to get the scratches out and props for polish step#2 polishes and acts like the 400-800 pad ...

GMR Quality Stone Products carries all Integra colors and a wide range and Products!

Integra Crystal Clear should do the job.
Feel free to give me a call and we can talk more in depth.
I sell all integra colors!!

Under mount sink holes, alpha electroplated drill bits.
hit me up with questions.

Alpha makes the tools for Dekton and they have their Katana blade listed for hand cutting.
The Alpha Silencer III, a number of our customers have bought for bridge saw as well.

stripper will not change the darkness of the stone.

if you want to use enhancer, you can try Akemi super Darkener, or Superior ICE, but these all leave the potential for your current problem to present itself again.

Denatured Alcohol or Glue gone should work just fine.

You can always use a color enhancer like tenax Ager. But as stated before this is a temporary fix. When polishing the edge 400grit and 800grit are the true polishing pads. Therefore take your time when polishing with those two grits.
Hope this helps!!

Gmr Quality Stone Products has them.

2209/2210-$135


440-232-9810

Quartz has hard and soft spots that is where the waves come from. Granite will always take a polishes better then Quartz.
Tyrolit tooling will eliminate the issue.

Call me if you would like to discuss tooling more in-depth.

Geremy Craft
Gmr Stone Products
440-876-3155

I like the Vincent Tyrolit Z wheels the best. No lines.

We have used a red floor pad with aqua mix deep stone clean to strip anything laying on the surface of black absolute honed or textured. It works great. As for sealing black absolute, we recommend never sealing it. It is too dense, and with a honed surface we have seen ghost rings appear when a seal...