Page 1 of 1
2009 Fabricator Awards
Posted: Sun Oct 25, 2009 2:00 pm
by Dan R.
Congratulations to the winners of the inuagral SFA fabricators awards.
Innovator of the Year: Seam Phantom (Kris Jorgensen)
Project of the Year: Patrona Marble (Nick Patrona)
Educator of the Year: Cameron DeMille
Re: 2009 Fabricator Awards
Posted: Sun Oct 25, 2009 8:35 pm
by Mark M
Congrats Kris, Nick, and Cameron. You guys really deserve it. Keep up the great work!
Re: 2009 Fabricator Awards
Posted: Sun Oct 25, 2009 9:36 pm
by Brian Briggs
Hats off to Dustin and his committee on how the judging went about and hats off to the winners. They truly deserve the awards the received!
Re: 2009 Fabricator Awards
Posted: Sun Oct 25, 2009 9:54 pm
by Troy Burnette
Re: 2009 Fabricator Awards
Posted: Mon Oct 26, 2009 5:37 pm
by Scott Vicario
Great work boys !!!
Re: 2009 Fabricator Awards
Posted: Mon Oct 26, 2009 6:28 pm
by politefab
show them how it is supposed to be done.. great work guys
Re: 2009 Fabricator Awards
Posted: Mon Oct 26, 2009 6:30 pm
by mikelaw
Congrats guys
Re: 2009 Fabricator Awards
Posted: Mon Oct 26, 2009 8:08 pm
by Todd Luster
Raising the Bar!!
Good Job and a big congratulations guys!!
Good idea and job on the whole idea too!
Re: 2009 Fabricator Awards
Posted: Mon Oct 26, 2009 8:10 pm
by Antonio Almonte
Congratulations Guys! Well deserved.
Re: 2009 Fabricator Awards
Posted: Mon Oct 26, 2009 10:00 pm
by Stone Dude
thanks, it was awesome!
congrats to Nick, Kris and Scott as well.
Re: 2009 Fabricator Awards
Posted: Tue Oct 27, 2009 3:15 am
by Kris Jorgensen
Thanks guys. I really appreciate all the support.
Congrats to Nick and Cameron, you guys really deserve it.
Re: 2009 Fabricator Awards
Posted: Tue Oct 27, 2009 6:27 am
by mikedean
Congrats to all!
Re: 2009 Fabricator Awards
Posted: Tue Oct 27, 2009 10:01 am
by Joshua Hopkins
Good job and congratulations guys you are great contributors here as well.
Re: 2009 Fabricator Awards
Posted: Wed Oct 28, 2009 8:27 pm
by scott m
These awards were right on target. I had no idea who was getting them, but called each one........congrats.
Re: 2009 Fabricator Awards
Posted: Sun Nov 01, 2009 6:55 pm
by John Koessler
Hi Chris, Nick, and Cameron
CONGRATULATIONS! Your awards were earned! Thank you all for your contributions thus far! Keep up the good work!

Re: 2009 Fabricator Awards
Posted: Tue Nov 03, 2009 8:34 pm
by Tom Shannon
Re: 2009 Fabricator Awards
Posted: Wed Nov 04, 2009 6:21 am
by dustinbraudway
They were carved pcs of Marble that were designed by Mike Stites our very own 3d CNC Guru and then engraved by his talented team. They looked awsome and by far the best looking industry award IMHO.
I will get picks up asap as I know Mike wants to see them and how they turned out in the hands of the recipents.
Re: 2009 Fabricator Awards
Posted: Wed Nov 04, 2009 7:07 am
by scott@stone age
Great job on everyone's part!!! True assets to our industry!!
Re: 2009 Fabricator Awards
Posted: Sat Nov 07, 2009 6:22 am
by Nick
Congrats to Cameron, Kris and especially Scott.
Thanks to Dustin for organizing everything to.
I can't thank the SFA enough. When I got the call from Vegas, I was really pumped up, and I have to get my dad on here at the new site to say some things, because he was really touched by it. We, and especially my father, have always worked hard with very little recognition, and as it set in over a day or so with my dad he was just realled touched by the award and the SFA in general. Thank you so much, it is an honor that we deeply appreciate and will display with pride! I am sure the other projects submitted all could have won this as well. There are alot of good things coming out of SFA shops and my hats off to whoever else submitted a project. I am sure all of the work submitted was worthy of recognition.
Re: 2009 Fabricator Awards
Posted: Sat Nov 07, 2009 7:10 am
by Steven Hauser
I thought had already said this.
Congratulations to a fine group that were judged by a fine group.
Well done.
Re: 2009 Fabricator Awards
Posted: Sun Mar 07, 2010 6:35 pm
by Gary Anderson
Congrats guys