New Product Special

[Mikec]

NCBV1375-500x500.jpg (22.09KiB)Viewed 709 times

This is the new Nano 1 3/8" high speed dry cutting core bit. It will dry cut through granite slabs in just seconds. In our tests on different 2 cm slabs this core bit ran at approximately 16 seconds per hole. This bit has brazed diamonds on the inside and the outside of the barrel to give you cleaner holes while trimming down the core for easier core ejection. The brazing also reduces heat build up on the core barrel. It is the fastest cutting dry core bit we have tested!
Listed on defusco.com for $54.90. On special for only $45.00. Order 2 for free freight in the Continental US.

N4BUFF.jpg (395.73KiB)Viewed 709 times

This is the New Nano Buff Pad. It was tested head to head against the Alpha on a variety of different granite's. Our customers could not find a difference in the results. We guaranty you will be impressed with the performance of this pad!
They normally sell for $49.90. On special for $39.90.

You can order by PM, email or a simple phone call.

[Dan R.]

Okay to use that core bit wet?
I am sure, but thought I would ask.

Send me 2 bits (1 1/2") and 2 (1")

Thanks.

[Mikec]

You know the answer to that one Dan! If a diamond segment was designed dry, you will usually get cleaner cuts and around 25% more life if you run them wet. This includes blades, core bits and cup wheels. Thanks for the order.

[Dan R.]

Just thought I would ask the expert.

[Mikec]

Thanks for the order Eric. Your Buff pads will ship today.