Glossy glue?

[blaight]

Anyone know of a glue that may be glossier than the normal knife poly's for seams. Did a black galaxy kitchen..seam phantom..gorilla grips and the seam chipped out...about the size of an eraser right in the middle of the run. Client wants it GLOSSY!!!!!! Any thoughts? Tried flowing..better but not GLOSSY enough. Notice how I emphasized GLOSSY...that's just how the client says it.......GLOSSY!
Thanks in advance

[Andy Ross]

I don't know of any glues that are GLOSSY. Is it possible you jam some chunks of stone in there when you pour the glue? They would be GLOSSY when you polish it out.

[VThartzog]

We had a similar issue with abs black medallion that blew out in a small spot. We used akepox5010 which is just an epoxy, but came back with an automobile paint polish compound to get that gloss to it. I'll try to find out what the product was

[graffster]

try some dia-glow it works great on CA

[markplaza]

Di-Glo x2. Use a felt pad

[luke getz]

the plexus uv glue polishes pretty good, not sure if it is quite as shiny as black galaxy, but it should be close

[Antonio Almonte]

Yup. CA and diaglo with a felt pad.

[B.Baltzegar]

I believe an acrylic will come out shinier than polyester.

[ash20ash]

I believe an acrylic will come out shinier than polyester.

Yes it will

[Solid Rock Oregon]

Yes Acrylic or CA or both depending on amount of repair.