NEW GRANITE Dolly OTLVISE

[Darryl Miller]

That's like trying to balance granite on a unicycle. No way that would be safe for my guys.

[OTLVISE]

two wheels side by side would make it balance and give stability? Ive seen a similar one wheel cart for glass but agree one wheel ALONE may not be enough.

Presently I USE this setup to add a third wheel with my work and its easy and very helpful at times

[Darryl Miller]

how about I put two wheels side by side instead

You've already done that based on the pictures you posted this past Sunday. And, that is nothing new or improved. The popular models of similar design that are being used by many use the weight of the stone to clamp it in place rather than a clamp you have to physically tighten and loosen. Like this http://www.abacomachines.com/products/detail/id/43

[clhilde]

If buy any more carts its going to pick the top up and put on the cabinet. Getting it in the house is not the problem picking it up to the top of the cabinet is the biggest issue that needs solved.

[OTLVISE]

can someone please post a pic of this for me? big slab on cart already so why not just tilt out and onto cabinet? Is it because you have the back side on the bottom of the cart? just trying to envision it

[Curtis R. Marburger]

can someone please post a pic of this for me? big slab on cart already so why not just tilt out and onto cabinet? Is it because you have the back side on the bottom of the cart? just trying to envision it

That is what that cart does that I posted pictures of OTLVISE there is a picture of the cart in box truck as well

Myself and 70 year old father put in place a full slab island with that cart pictured

You really need to get to a SFA shop and watch them install stone .

[OTLVISE]

like that cart and have seen many like it. Wonder why they stopped selling them? maybe those wheels...

If I use the OTLVISE 4 foot Slate shoe to protect a counter opening by placing the cavity between the clamps a cavity will be protected. Sink hole now on bottom of cart. Roll in and release lock pins and tilt onto counter or island. Once on counter release clamps, take off shoe and slide it on rest of way.
The shoe is 1/4 steel and very strong.

NO lifting, roll in and lean on, then release 4 ft shoe, Voila!

[Dan R.]

Like the OMNI CUBED pro dolly. That will be what you need to compete against. Peek at their website if you want to see what a quality cart that works looks like.

[OTLVISE]

maybe its the other way around

[GuyboR]

maybe its the other way around

That very well may be. But they have a butt load of them out there and many many happy customers to call and talk to. You have how many out in the granite industry? zero?

You may want to quit coming across as the all mighty know it all savior to us, and be a little more humble and grateful that others have offered input what we see that works and links to what we already use.

[Dan R.]

maybe its the other way around

Wow! I was actually trying to help out. I guess I will leave you to your own devices to reinvent this wheel. As one last favor, I will tell you that you are so far behind the curve, that someone needs to pump daylight so you can see what is actually happening.

Good luck, you will need plenty of it to even get into this game, let alone be successful.

[OTLVISE]

I thanked the fellow for showing me the cart he uses. Ive also given thanks out before as indicated on my profile.

[OTLVISE]

maybe its the other way around

Wow! I was trying actually help out. I guess I will leave you to your own devices to reinvent this wheel. As one last favor, I will tell you that you are so far behind the curve, that someone needs to pump daylight so you can see what is actually happening.

Good luck, you will need plenty of it to even get into this game, let alone be successful.

I got money says you will post again in this thread. You have over 15000,

[Curtis R. Marburger]

Otlvsise
man I wish I could help you but to try and change your attitude is just as difficult as my own.
all the gentelman and ladies who responded on this thread are topshelf class act people .
the last thing they would endorse is a copy cat product. The cart I posted is no longer being made and with simple modification aded to what I have alteady done you would get orders for it . But with that altitude you are displaying you are destroying yourself
please stop
I would wager this thread gets locked

[OTLVISE]

OTLVISE is a Patented Invention and NOT a "copy cat". We agree though that attitudes are likely not to change.

Best point of the thread really IMO...

[Ken Lago]

Many talents have gone wasted due to unwillingness to change a bad attitude. You can have all the patents in the world and think you are smarter than anyone else but you will remain a nobody unless you develop some communication skills and humility.

[Darryl Miller]

Like the OMNI CUBED pro dolly. That will be what you need to compete against. Peek at their website if you want to see what a quality cart that works looks like.

My very first thought when I saw the picture as well. Except the OMNI CUBED product far exceeds this in quality of construction.

[Darryl Miller]

maybe its the other way around

This attitude will pretty much guarantee failure on your part to have any success here. Maybe you need to stick to pool table moving and leave us out of your game. You have been given honest opinions and feedback on what you have proposed. It's not our fault that you can't build a better mouse trap.

[Stone Dude]

maybe its the other way around

You know, I was really hoping you would take the advice given and come up with something cool, but after this comment, I couldn't care less. Quit being a douche.

[Curtis R. Marburger]

Also OLTVISE
you at the least owe an apology to Omni Clamp for the acusation you brought up sugesting pattent infringment. Most who posted comments on this thread were there to witness the birth of Omni Clamp The owners are ethical business people and give back in their comunity and are supporters of the SFA. So to take a swat at omni is a swat against the SFA. Some on this thread were there during prototype stages and testing and probably would have no problem testifing for Omni .

[OTLVISE]

when you insult my product you insult me. My product is NOT a copy cat and that's what one of the members said it was accused of being. I said it was Patented. I should be apologized to and on many points including forum decorum. Its not up to me to decide Patent infringement that you bring up and that's not my INTENTION so don't try to insinuate that. FYI my goal is to sell my patents as they are great ideas and will takeover because its NOT who invents things that makes an invention, its as you said... How well will it work and does it make sense, cents...

You guys have beat me down one after one, the more the merrier and ALL the while WITHOUT EVER even seeing the product. You think that feels good? I guess so...... You judge my product, you judge me in the same way as my product. Maybe you should put the shoe on the other foot and have someone else read the thread. Its the constant assault that makes me disappointed. But its obvious I CAN"T say anything right. ITS YOUR FORUM!

To Omni I have already said they have a nice product. Larry and I talked about some questions I had as he indicated in this thread. He stated that in the thread, so after saying that why would anyone keep suggesting to look at the OMNI site? I in fact like their company and the manner in which they have dealt with me earlier but more specifically here. You are correct and I appreciate their professionalism. I KNOW they could do allot with my ideas.

[skulptor007]

Man are you guys patient! I need more popcorn since this has gone into entertainment mode, what a wasted opportunity shown to a huge resource of knowledge and the willingness to share it! Very sad, but hopefully not the end.
John please re -evaluate what you have in this forum.

“Ah, how the seeds of cockiness blossom when soiled in ignorance.”
― Steve Alten, The Loch

[graniteman]

Man are you guys patient! I need more popcorn since this has gone into entertainment mode, what a wasted opportunity shown to a huge resource of knowledge and the willingness to share it! Very sad, but hopefully not the end.
John please re -evaluate what you have in this forum.

“Ah, how the seeds of cockiness blossom when soiled in ignorance.”
― Steve Alten, The Loch

X2

[Darryl Miller]

Man are you guys patient! I need more popcorn since this has gone into entertainment mode, what a wasted opportunity shown to a huge resource of knowledge and the willingness to share it! Very sad, but hopefully not the end.
John please re -evaluate what you have in this forum.

“Ah, how the seeds of cockiness blossom when soiled in ignorance.”
― Steve Alten, The Loch

x3

I vote to delete the whole thing at this point.

[Curtis R. Marburger]

Man are you guys patient! I need more popcorn since this has gone into entertainment mode, what a wasted opportunity shown to a huge resource of knowledge and the willingness to share it! Very sad, but hopefully not the end.
John please re -evaluate what you have in this forum.

“Ah, how the seeds of cockiness blossom when soiled in ignorance.”
― Steve Alten, The Loch

x3

I vote to delete the whole thing at this point.

x4