Honed Material

[Scooter]

Happy Monday Friends I have 3 slabs of 3cm shadow storm customer wants them honed they are currently polished can anyone tell me the easiest but effective way to hone slabs thankyou...

[Alex DiPietro]

Easy to do with 4" pads... even out with powder, sandpaper or screens.

[Stone Dude]

I would cut the pieces out first, then hone them. What Alex said, 4" pads, cut the polish off with 220 grit, then finish with honing powder.

These pads work well for cutting off the polish: http://www.easystonecare.com/Honeycomb- ... -p/hc4.htm

These are even more aggressive on the lower grits: http://www.easystonecare.com/Copper-Hyb ... p/chs4.htm

This is the honing powder that will leave a nice, even finish: http://www.easystonecare.com/Soft-Cut-2 ... /sc220.htm

Apply it with water, LOW speed, like 600-800rpm with these white pads: http://www.easystonecare.com/7-Hog-s-hair-pad-p/wp.htm

Then Seal it with Proseal: http://www.easystonecare.com/Tenax-Pros ... roseal.htm

Or MB-24 if odor is an issue: http://www.easystonecare.com/MB-24-Natu ... /mb-24.htm

[Mitch@ASW]

Cam's honing powder has saved my @$$ more than once, it's great stuff.

[Scooter]

Ok thanks for the help ill let you know how it all turns out...