Saw blades for Quartzite

[Camzl1]

New Terminator Nano Q2-S cutting and mitering Taj-Mahal in one pass on 2 and 3cm. We are getting results back from Alex at 48"/min at very low loads in one pass. It will go faster on 3cm. Here at Jame's shop we were cutting Taj Mahal at 101"/min at 1750 rpm with only 4&5 amps above idle. See the Facebook site for the videos. It will not let me attach a .mov file on the forum.

[Amroczka]

#WITNESSED