caesar stone repair

[john b]

Had to hand cut an inside corner yesterday, blade got caught and jumped hitting the face of the caesar stone. This made a small groove in the surface--- has or does anyone have the best solution to fix this other than recutting, This would cost me another slab.

[Ken Lago]

John, ask that question in the members lounge and you will get answers. You are a member right?

[Kowboy]

John:

It depends on the color and particulate of the Ceasarstone. Some have had success with the light cure kit from Domain Industries. Google it.

Joe

[politefab]

its a savable mistake if your not a member yet PM me we are all about helping out fabricators in need i can call you or you can call me E.S. is extremely easy to fix

[Matt Lansing]

I have had success layering different colors into the area that match the particulate of the stone with polyester knife grade and razor blade it down to the surface. If it is not shiny enough then you may need to do a top coat of CA.

Should be an easy fix if it is not one of the fine grained es materials. Those can be harder to match.

[Todd B]

E.S. is extremely easy to fix

Really

How much will you cost me to come and work in NZ