Page 1 of 1
How not to fabricate....please share with your customers.
Posted: Fri Oct 12, 2018 6:39 pm
by Mark Lauzon
This version is for sharing with your customers....
https://www.youtube.com/watch?v=D0DG4Wh6Hz8
This version is not safe for work but fun:
https://www.youtube.com/watch?v=dgnk65yLdEI&t=23s
Re: How not to fabricate....please share with your customers.
Posted: Fri Oct 12, 2018 7:43 pm
by GuyboR
Of all places for those poor boys to set up shop....right across the street from you.
Re: How not to fabricate....please share with your customers.
Posted: Fri Oct 12, 2018 11:50 pm
by Mark Lauzon
Good guys....need some training, but good attitude. This is no slam on them...they should have fabricated it in SHOP OWNERS DRIVEWAY and delivered them. I could not believe my eyes....I saw the video in my minds eye in 1/10th of a second.
Re: How not to fabricate....please share with your customers.
Posted: Sat Oct 13, 2018 6:29 am
by Dan R.
Crazy cutting the splash off the blank with a grinder. Ona positive note, it looked like Makita has a super plunge option (knock off0.
Re: How not to fabricate....please share with your customers.
Posted: Sat Oct 13, 2018 11:24 am
by cliveyt
Fantastic!!!
Re: How not to fabricate....please share with your customers.
Posted: Sat Oct 13, 2018 2:44 pm
by Kowboy
- IMG_0129 (2).jpg (304.07KiB)Viewed 687 times
Dang, them's some perfessionals there. I been cuttin' right in the kitchen, but I got me some fancy dust killettin' e-quipment.
Can't make no money pullin' tops.
- IMG_0138 (2).jpg (301.58KiB)Viewed 687 times
Re: How not to fabricate....please share with your customers.
Posted: Mon Oct 22, 2018 10:55 pm
by Kowboy