LT 55

[Express Granite]

Im wonder how much everyone offset from the panel to wall and wall to wall to get the piece in smooth. I found the laser is always little big we offset 3/32 and im thinking to go with 1/8' each side. thanks for advance.

[Darryl Miller]

If the wall to wall top is 72" or less I offset each end 1/16" (or 1/8" overall). Longer tops would depend on site situation but mine would never be more than 1/8" short on each end whenever possible.

[wkluender]

X2

[Express Granite]

thanks. Will that an issue on installation of 1/8" overall.

[STEVE NY]

We offset 1/16" on both ends, if it has a seam and gets backsplash we do a little more to make it easier to do the seam. To avoid scuffing the wall on short vanity tops we throw a piece of laminate against the wall to slide the top in.

[crisco]

i like to do -0.10 on all walls. according to my lasers and machines calibration this translates to an 1/8 (as of 8/8/17).