Page 1 of 1
brazed seam wheels
Posted: Fri Mar 16, 2012 1:55 pm
by clhilde
feeds and speeds please
Re: brazed seam wheels
Posted: Fri Mar 16, 2012 2:06 pm
by Joshua Hopkins
4500 rpms 1.5-2meters a min
Re: brazed seam wheels
Posted: Fri Mar 16, 2012 2:27 pm
by clhilde
thank you sir
Re: brazed seam wheels
Posted: Fri Mar 16, 2012 2:29 pm
by Joshua Hopkins
That is about what I use just watch your amp draw and listen to the machine you will get a fill those numbers should get you in the ballpark.
Re: brazed seam wheels
Posted: Fri Mar 16, 2012 3:35 pm
by Bretth
1.5-2 meters min.... 60-80" min.... Damn you guys haul balls. 5000RPM's 25" min here
Re: brazed seam wheels
Posted: Fri Mar 16, 2012 7:16 pm
by VThartzog
4000 rpms at 1.2m. I hardly can hear them run.
Re: brazed seam wheels
Posted: Sat Mar 17, 2012 12:05 pm
by DavidL
5000rpm, 1m/min I always saw 110meters of use before they stopped cutting and started pushing.