Matrix 2000 GSC bridge saw MUST GO!!!!! SOLD

BC Granite and Marble · Post by **BC Granite and Marble** » Tue Apr 22, 2014 10:33 pm

We have a Matrix Bridge saw that has been used as a second saw. We are two weeks away from new saw and need to find this saw a new home because we need the space. As of now it is up and running and can be seen cutting the only thing this saw lacks is a tilt table you could add if needed. $13,000 or come see it run and make me an offer
AJ 970-218-9795

T.J. Henderson · Post by **T.J. Henderson** » Wed Apr 23, 2014 11:10 am

Are the legs on the front of that for "titling" slabs onto the table?

BC Granite and Marble · Post by **BC Granite and Marble** » Wed Apr 23, 2014 12:19 pm

Yes that is what those legs are for, with fragile stone we use sink bars and cups, not as nice as a tilt table but it works.

innstone · Post by **innstone** » Thu Apr 24, 2014 6:34 pm

I have a similar model. The guy I got it from made a cradle that works great. We have never had any stone break when loading it on. I'll try to remember to send a pic tomorrow. I used to have a tilt table but I don't even miss it with this add on.

BC Granite and Marble · Post by **BC Granite and Marble** » Thu Apr 24, 2014 8:59 pm

I have to admit it will be hard to let her go, she was here from the beginning, I hope she can help someone the way she has us. Joe, the old owner Matrix came and installed this saw himself with another guy. If I remember correctly she was the 29th bridge saw in this state now there are hundreds. Only one importer in the whole state at that time IMG and he would not sell slabs to anyone with out a bridge saw, I was so proud when I called and told him to come and check out our saw. Im sure she has another million inches of cuts left in her.

innstone · Post by **innstone** » Tue Apr 29, 2014 5:32 pm

I finally took pics, if anyone doesn't want to wait for me to setup picture posting, email me & I will send you picks of how we solved the lack of tilt-table feature.

BC Granite and Marble · Post by **BC Granite and Marble** » Tue Apr 29, 2014 9:41 pm

I would be interested in how you did it, post pics when you can.

Justzack · Post by **Justzack** » Wed Apr 30, 2014 8:31 am

Is it 20 hp and does it miter?

BC Granite and Marble · Post by **BC Granite and Marble** » Wed Apr 30, 2014 7:56 pm

I honestly dont know the HP, I will look in the owners manual. You can miter but it is all manual and time consuming, if you plan on a bunch of miter jobs this is not the right saw.

BC Granite and Marble · Post by **BC Granite and Marble** » Wed May 07, 2014 7:17 am

Our new saw shows up today. I need to break this saw down soon if any one wants to see it run let me know. Make us an offer as we need the space.

BC Granite and Marble · Post by **BC Granite and Marble** » Wed May 07, 2014 12:27 pm

If someone wants to purchase this saw in the next week, we have a tech that can load it for you. Free of charge!

Template whizz · Post by **Template whizz** » Mon Jun 30, 2014 10:18 am

Hi AJ , Is the saw still available?
Thanks
Ben

BC Granite and Marble · Post by **BC Granite and Marble** » Mon Jun 30, 2014 2:07 pm

The saw has been sold. Sorry I guess I should have updated the post.

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Matrix 2000 GSC bridge saw MUST GO!!!!! SOLD

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!

Re: Matrix 2000 GSC bridge saw MUST GO!!!!!