2012 GMM Intra 36SFX - 5 axis NC Saw - SOLD

[GuyboR]

We have purchased a new saw and are going to sell our 5 Axis GMM Saw.

This is a 2012 Intra saw. It is a full 5 axis saw meaning that it can automatically cut miters and radii. It also has a camera to allow taking a picture and placing the part on the material regardless of where it is sitting on the table. Tilting table is included.

The saw cuts from standard DXF files along with being able to run it as a manual saw.

New this saw is in the $175,000 range. We are asking 65,000

Price does not include tear down, loading or shipping. You would need to build walls and hire a tech (GMM preferrably) to set and calibrate the machine.

IMG_20190530_130801.jpg (172.17KiB)Viewed 972 times

20190528_132007.jpg (194.71KiB)Viewed 972 times

20190528_132031.jpg (166.71KiB)Viewed 972 times

20190528_133443.jpg (90.25KiB)Viewed 972 times

20190528_133449.jpg (94.25KiB)Viewed 972 times

20190528_132015.jpg (154.05KiB)Viewed 972 times

20190528_132021.jpg (148.11KiB)Viewed 972 times

Annotation 2019-05-30 135338.jpg (133.46KiB)Viewed 971 times

20190528_133410.jpg (78.74KiB)Viewed 971 times

[DanoR]

a job from last year. 2" Sandstone circles.

[GuyboR]

Bump.....

Our "new to us" saw showed up this week so we are eager to get it set up. I would prefer to have the GMM sold before taking it out of production.

[GuyboR]

Asking price reduced to $65,000.

We have our "new to us" saw sitting in our shop and really want to move this one.

[Trasonsky]

Hi,

Is this saw still for sale?

Tommy

[GuyboR]

Hi,

Is this saw still for sale?

Tommy

Yes

[Trasonsky]

Hi Guy,

We inquiered from GMM about cost to deliver, install and train for this saw. Could you give us some more information on this saw? Use, wear & tear, etc. I am new to SFA, I sent private message but not sure it went through.

Thanks, Tommy

[GuyboR]

Tommy,

The saw is in great shape....but everyone selling a machine will tell you that.

Numerous SFA members saw it last year when we hosted a workshop. We have not crashed it. We do upkeep on it. We moved it once when we bought a building and we had GMM come in and remove and reinstall it (that was 3.5 years ago).

Give me a call to discuss and I can answer any specific questions. You are also more than welcome to come look at it. It's still in operation. I don't want to pull it down until it's sold. So availability is nearly ASAP (based on getting a tech to set my "new to me" saw up)