12" ZEN21225
14" ZEN21425
16" ZEN21625
18" ZEN21825
20" ZEN22025
ZENESIS BRIDGE SAW BLADE 25MM
Moderators:Mark Smith, Alex_Bores
-
Mark Smith
- SFA Sponsor - Guardian
- Posts:663
- Joined:Tue Dec 15, 2009 12:06 pm
- Location:Vernon Hills, IL
- Has thanked: 115 times
- Been thanked: 30 times
- Contact:
12" ZEN21225
14" ZEN21425
16" ZEN21625
18" ZEN21825
20" ZEN22025
-
Matt Lansing
- SFA Director
- Posts:5216
- Joined:Tue Oct 27, 2009 6:42 pm
- Has thanked: 14 times
- Been thanked: 131 times
Re: ZENESIS BRIDGE SAW BLADE 25MM
We have been running the Zenesis II on our Sprint Jet with pretty good results.
The saw doesn't like the 14" blade but the 16" blade runs really well. We have typically been getting about 6 weeks of life out of them cutting about 900 square feet of finished countertops a week.
The saw doesn't like the 14" blade but the 16" blade runs really well. We have typically been getting about 6 weeks of life out of them cutting about 900 square feet of finished countertops a week.
Matt Lansing
Stone Innovations, Inc.
Plover, WI USA
"The difference between an obstacle and an opportunity is our attitude towards it. Every opportunity has a difficulty, and every difficulty has an opportunity.
Stone Innovations, Inc.
Plover, WI USA
"The difference between an obstacle and an opportunity is our attitude towards it. Every opportunity has a difficulty, and every difficulty has an opportunity.
-
Mark Smith
- SFA Sponsor - Guardian
- Posts:663
- Joined:Tue Dec 15, 2009 12:06 pm
- Location:Vernon Hills, IL
- Has thanked: 115 times
- Been thanked: 30 times
- Contact:
Re: ZENESIS BRIDGE SAW BLADE 25MM
That's awesome Matt. A new 18mm version of the Zenesis 2 is now available. This will reduce the cost associated with a 25mm segmented blade & allow shops that are on the fence to get the same Zenesis technology at a lower price point.
-
Mark Smith
- SFA Sponsor - Guardian
- Posts:663
- Joined:Tue Dec 15, 2009 12:06 pm
- Location:Vernon Hills, IL
- Has thanked: 115 times
- Been thanked: 30 times
- Contact:
