The smaller diameter bits are my preference, and they gotta be inexpensive. Think 5 guys going to Hardees type money
Any of you guys closing out anything let me know.
Need Cheep Fingerbits......
Forum rules
***** IMPORTANT NOTICE *****
This is a public room where individuals or SFA Sponsors can post ads for things they are looking to sell or buy.
Contact info including Name, Company, Phone, Email and Location is necessary for posting of items for sale.
ALL ITEMS LISTED FOR SALE MUST INCLUDE AN ASKING PRICE
Failure to include any of this info could result in the removal of your post.
***** Once your item is sold, please edit the original post title to include "-SOLD". *****
***** IMPORTANT NOTICE *****
This is a public room where individuals or SFA Sponsors can post ads for things they are looking to sell or buy.
Contact info including Name, Company, Phone, Email and Location is necessary for posting of items for sale.
ALL ITEMS LISTED FOR SALE MUST INCLUDE AN ASKING PRICE
Failure to include any of this info could result in the removal of your post.
***** Once your item is sold, please edit the original post title to include "-SOLD". *****
-
ChrisYaughn
- Posts:1826
- Joined:Sun Oct 25, 2009 8:20 pm
- Been thanked: 5 times
There, I said it. My girl doesn't care for the fancier new bits you guys like. Probably due to marginal water volume thru the spindle and the fact that I am always cutting fully engaged.
The smaller diameter bits are my preference, and they gotta be inexpensive. Think 5 guys going to Hardees type money
Any of you guys closing out anything let me know.
The smaller diameter bits are my preference, and they gotta be inexpensive. Think 5 guys going to Hardees type money
Any of you guys closing out anything let me know.
-
ChrisYaughn
- Posts:1826
- Joined:Sun Oct 25, 2009 8:20 pm
- Been thanked: 5 times
Re: Need Cheep Fingerbits......
When I go to ebay all I see are used fingerbits with a $75 reserve on them.
I need to get lucky like Scott did a while back.
I need to get lucky like Scott did a while back.
-
badboat
- SFA Member
- Posts:639
- Joined:Tue Oct 27, 2009 8:06 pm
- Has thanked: 3 times
- Been thanked: 15 times
Re: Need Cheep Fingerbits......
Chris,
Check this one out. I found out about this form Scott @Kasco. For the price you can't go wrong and they last a decent amount of time. https://www.galaxytoolsupply.com/Produc ... tCode=7500 Even if they are out of stock call them they may have them some place else and be able to get them to you quick.
Check this one out. I found out about this form Scott @Kasco. For the price you can't go wrong and they last a decent amount of time. https://www.galaxytoolsupply.com/Produc ... tCode=7500 Even if they are out of stock call them they may have them some place else and be able to get them to you quick.
Mike Gladstone
GCI Surfaces
Clearwater, FL
727-571-1071
GCI Surfaces
Clearwater, FL
727-571-1071
-
ERIC HANSON
- Posts:15
- Joined:Fri Jan 08, 2010 9:11 am
Re: Need Cheep Fingerbits......
Hi Chris,
I sent a pm, but thought I would post here too.
Please check out my website: Cheapstonetools.com, we have a lot of new over stock finger bits starting at $ 21.60 each.
Here is the link: http://cheapstonetools.com/node/699
Make me an offer on volume purchases - We are very long in these, that is why they are so cheap.
Disclaimer:
These are cheap finger bits. Some people like them and some do not.
You generally get what you pay for. There have been some quality control issues with these, but
most of them will run fine.
Call me directly with any questions or for volume purchases.
Eric Hanson
Granite City Tool
320-761-1449
eric@granitecitytool.com
I sent a pm, but thought I would post here too.
Please check out my website: Cheapstonetools.com, we have a lot of new over stock finger bits starting at $ 21.60 each.
Here is the link: http://cheapstonetools.com/node/699
Make me an offer on volume purchases - We are very long in these, that is why they are so cheap.
Disclaimer:
These are cheap finger bits. Some people like them and some do not.
You generally get what you pay for. There have been some quality control issues with these, but
most of them will run fine.
Call me directly with any questions or for volume purchases.
Eric Hanson
Granite City Tool
320-761-1449
eric@granitecitytool.com
-
Mark Smith
- SFA Sponsor - Guardian
- Posts:663
- Joined:Tue Dec 15, 2009 12:06 pm
- Location:Vernon Hills, IL
- Has thanked: 115 times
- Been thanked: 30 times
- Contact:
Re: Need Cheep Fingerbits......
Chris I have some low cost bits on clearance as well you might want to take a look at. If your interested lmk.
-
ChrisYaughn
- Posts:1826
- Joined:Sun Oct 25, 2009 8:20 pm
- Been thanked: 5 times
Re: Need Cheep Fingerbits......
Thanks to everyone.
Now I encourage all of you guys with nice tight proper CNC's to run the poop outta the fancy new bits. Stroke them at 750 mph and get it done.
Have fun.
Now I encourage all of you guys with nice tight proper CNC's to run the poop outta the fancy new bits. Stroke them at 750 mph and get it done.
Have fun.
-
db*toolgirl
- SFA Sponsor - Friend
- Posts:68
- Joined:Wed Nov 11, 2009 5:46 pm
- Has thanked: 17 times
- Been thanked: 3 times
- Contact:
Re: Need Cheep Fingerbits......
Our website is not quite finished but we would be happy to help you out with some choices we have. My info is at the bottom and Customer Service is 800-845-1805. 
Annie Cline
Fabrication Sales Manager
913.219.5087 - cell
563.419.4722 - cell 2
annie.cline@husqvarnagroup.com
Fabrication Sales Manager
913.219.5087 - cell
563.419.4722 - cell 2
annie.cline@husqvarnagroup.com
Re: Need Cheep Fingerbits......
The cheapest best bit I have found were the fingerbits I bought from Diamont Boart - JC Collins, There were red and 5 segments. I think they were around $69 or less new and they performed almost as good as my orange mills from ADI at $100 a bit. I did have to slow down the feed a bit.