This is cool
-
Curtis R. Marburger
- Posts:3880
- Joined:Tue Oct 27, 2009 7:42 am
- Has thanked: 7 times
- Been thanked: 54 times
-
Mike Stites
- SFA Member
- Posts:396
- Joined:Tue Oct 27, 2009 5:35 am
- Location:Flint, MI
- Has thanked: 2 times
- Been thanked: 1 time
- Contact:
Re: This is cool
We have one that came with our 5 axis machine, it's the older single camera but work nice for relief carvings.
Here is a project we did, 1/2 scale clay model to limestone.
Here is a project we did, 1/2 scale clay model to limestone.
Mike Stites
Genesee Cut Stone & Marble Co.
5276 S. Saginaw Rd.
Flint, MI
(810)-743-1800
mikestites@gcsm.com
Quality in stone since 1954
Genesee Cut Stone & Marble Co.
5276 S. Saginaw Rd.
Flint, MI
(810)-743-1800
mikestites@gcsm.com
Quality in stone since 1954
-
Camzl1
- SFA Sponsor - Guardian
- Posts:441
- Joined:Fri Dec 04, 2009 4:07 pm
- Has thanked: 13 times
- Been thanked: 57 times
Re: This is cool
I have nothing but great things to say about scantech. I had a situation in Texas on a Lathe machine for CMS that required a call to scantech. The owner Claus, took my call and stayed on the phone with me for a good hour and a half to get issues and training taken care of.
Eric Pate
Technical Director
TERMINATOR DIA, INC
SFA 2012 Educator of the Year
980-333-3540
Technical Director
TERMINATOR DIA, INC
SFA 2012 Educator of the Year
980-333-3540
-
Mike Stites
- SFA Member
- Posts:396
- Joined:Tue Oct 27, 2009 5:35 am
- Location:Flint, MI
- Has thanked: 2 times
- Been thanked: 1 time
- Contact:
Re: This is cool
Same here about Claus, goes above and beyond to help you.
Mike Stites
Genesee Cut Stone & Marble Co.
5276 S. Saginaw Rd.
Flint, MI
(810)-743-1800
mikestites@gcsm.com
Quality in stone since 1954
Genesee Cut Stone & Marble Co.
5276 S. Saginaw Rd.
Flint, MI
(810)-743-1800
mikestites@gcsm.com
Quality in stone since 1954