GoClips 5-Second Anchors for Undermount Sinks

GoClips · Post by **GoClips** » Thu Mar 26, 2015 10:18 am

GoClips is a new anchoring clip for undermount sinks that combines the ease of use and versatility of other similar products. The only tools you need are the ones you already have-a grinder and a 4"-6" turbo blade. You simply drop the blade 1/2" deep into the stone and make it just wide enough for the down tab of the GoClips. That's it. You're done. No butterfly cuts. No waiting for epoxy to dry. No drilling holes by hand. No cutting t-31 slots. No fidgeting with multiple parts and pieces. The time savings alone make GoClips the most economical sink anchoring method available to date.

GoClips are also designed to engage even before you tighten the screws. The attached(and removable) spring clip is super strong and will lock GoClips in place even upside down so you can insert one into a slot and actually let go for true hands-free installation.

We do NOT want SFA members to take our word that GoClips is the Fastest and Easiest way to anchor undermount sinks. We have contacted a handful of SFA members who are very active on these forums and in the industry. We have sent them sample packs of GoClips and requested that they use them and provide feedback on this forum for anyone to see.

We would also like to offer 25 more SFA members 4 free GoClips to try out on a vanity bowl. We will pay for shipping. All we ask is if GoClips is not the fastest and easiest product anyone has ever used to anchor undermount sinks, please let us and all other SFA members know. The 1st 25 companies to post your shop address or PM an address will receive these free samples.

GoClips is not identical to any other product in design, method of use, or practice. GoClips was designed to address issues that numerous other products have failed to address. Please see our website for new versions coming soon.

GoClips started shipping last week to distributors and are available now. Please check our website for a current list. If you do not see your favorite distributor let us know and we will contact them.

Thank you.
sales@zkeepersllc.com
http://www.goclips.us

ash20ash · Post by **ash20ash** » Thu Mar 26, 2015 12:18 pm

Got mine in yesterday. Appears to be very well built. And the ease of use by cutting with a blade vs drilling should be great for the shops without cnc's.

Looking forward to trying them.

tallzeng · Post by **tallzeng** » Thu Mar 26, 2015 1:35 pm

I will give them a shot as well.

Joe Little · Post by **Joe Little** » Thu Mar 26, 2015 2:07 pm

I ordered them before our trip , they got in early last week and the guys started using them last week and love them , easy and quick.
We only ordered 30 up front , but have already placed another order to make sure we stay stocked .

darrencapaul · Post by **darrencapaul** » Fri Mar 27, 2015 12:55 am

I'd love to give them a try. Will post results after using them.

ageless · Post by **ageless** » Fri Mar 27, 2015 9:14 am

I'll give them a try.

GoClips · Post by **GoClips** » Fri Mar 27, 2015 9:43 am

**NOTE** This thread was intended as a discussion of GoClips, not as a "Classified Ad". We do not sell direct and are not trying to sell anyone anything. We are just trying to let people know about this new product and give members an opportunity use it and report their findings to other members in an honest and unfiltered way. Please provide feedback in General Discussion threads if possible(or here is OK too).

Thanks to everyone who has made a request so far. Will ship the first 10 sample packs today for delivery on Monday.

Tim, Thank you. Your samples ship today. Will get your address from your website unless you let us know otherwise.

Joe, Thank you. Your samples ship today. Will get your address from your website unless you let us know otherwise.

Darren, Thank you. Your samples ship today. Will ship to the address you provided here.

Rey, Thanks. Your samples ship today. Will get your address from your website unless you let us know otherwise.

The PM requests ship today as well.

Thank you!!

steven nenzel · Post by **steven nenzel** » Fri Mar 27, 2015 5:50 pm

I would definitely like to try the cnc clips. When do you expect delivery?

Clyde Kingry · Post by **Clyde Kingry** » Sat Mar 28, 2015 6:19 am

GoClips wrote: We would also like to offer 25 more SFA members 4 free GoClips to try out on a vanity bowl. We will pay for shipping. All we ask is if GoClips is not the fastest and easiest product anyone has ever used to anchor undermount sinks, please let us and all other SFA members know. The 1st 25 companies to post your shop address or PM an address will receive these free samples.

GOCLIPS CNC

Clyde M. Kingry
Southside Granite Company
301 Chalker St
Dothan, Alabama

GoClips · Post by **GoClips** » Sat Mar 28, 2015 8:33 am

Steven and Clyde,

Will put you on a list to get CNC goclips. Will have production samples in the next 3 weeks. Delivery to distributors will be end of May.

You will need a 10mm bit if you don't already use one.

Thanks.

GuyboR · Post by **GuyboR** » Sat Mar 28, 2015 9:03 am

GoClips......please fill out your signature line so everyone knows who they are typing to.

A link to do so is in my signature line.

Thanks

Planet Stone · Post by **Planet Stone** » Sun Mar 29, 2015 5:53 pm

I would to try them out. Actually, I believe we are right down the road from your offices. Please stop in any time and introduce yourself!

Planet Stone
601 6th Ave. W.
Bradenton, FL 34205

GuyboR · Post by **GuyboR** » Sun Mar 29, 2015 8:09 pm

GuyboR wrote:GoClips......please fill out your signature line so everyone knows who they are typing to.

Thanks Dave.

Stone Dude · Post by **Stone Dude** » Mon Mar 30, 2015 11:04 am

I'd like to try a few please.

GoClips · Post by **GoClips** » Mon Mar 30, 2015 3:56 pm

Brooke and Cameron, your samples were shipped today.

So far 19 companies are receiving samples and most are receiving them today. Let us know if anyone needs tracking #'s.

Really appreciate the interest and feedback so far.

Have a great day.

tim farr · Post by **tim farr** » Mon Mar 30, 2015 4:44 pm

I'll try some of the cnc clips when you get them. Thanks

Jon_sambor · Post by **Jon_sambor** » Wed Apr 01, 2015 12:49 am

Ill try the cnc clips

Darryl Miller · Post by **Darryl Miller** » Wed Apr 01, 2015 6:11 am

I'll try some as well if still available.

Ken Lago · Post by **Ken Lago** » Wed Apr 01, 2015 6:38 am

I would like to try both the manual and cnc clips if possible, thanks.
Address is in my signature.

graffster · Post by **graffster** » Wed Apr 01, 2015 8:49 am

If there's any left I would like to try some,just now seen this. Thanks

Jupiter Granite · Post by **Jupiter Granite** » Wed Apr 01, 2015 6:16 pm

I would like to try them if still available.

Planet Stone · Post by **Planet Stone** » Wed Apr 01, 2015 7:56 pm

Dave,

We received the clips today, thank you! We will try them out and post some feed back. Just looking at them and catching the concept, the guys seemed pretty excited about them!

Thanks,

Brooke

crisco · Post by **crisco** » Thu Apr 02, 2015 8:31 am

i told my boss to call you, his names nate from tampa fl. he left a vm. i think we will order by the case if you have enough.

ageless · Post by **ageless** » Thu Apr 02, 2015 8:49 am

We received the clips this week and will give them a try. Are the ones you sent only for porcelain sinks or will they also work on ss? I noticed you had a different clip for ss on your website.

Dan R. · Post by **Dan R.** » Thu Apr 02, 2015 9:19 am

I received samples, by surprise, before any request could be made. I also received some sticks (for mounting sinks) that I had previously seen at a trade show.

They appear to be convenient, but what is the price?

We have yet to try them, but should get around to them in the next week or two. They looking promising, but I do have some concerns.

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

Visit our Guardian Sponsors

GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks

Re: GoClips 5-Second Anchors for Undermount Sinks